Arch Light Electronic Ignitors

Arch Light Electronic Ignitors

Tornado™ Electronic Ignitors are designed for applications where fuel gas does not exist, or for conditions where gas conservation is considered to be of importance. The Tornado™ Electronic Ignitor head is totally retractable or weld on. The head assembly on the retractable unit can be moved up or down in the wind shroud to find the best ignition point where the air and fuel meet. The ignitor head insulator is mounded 5’ below the intense heat of the flare, so it is not subjected to high heat and cracking. The arch spacing will not change because the arch and “T” design remains consistent under high heat and warping conditions caused by winds blowing the gas to one side of the flare tip. We feel that when you consider an electronic ignitor, you should consider the durable and effective design of the Tornado™ Arch Light System.

Features:

  • High (30,000 volt) intermittent ignition, 24 hours per day
  • Unique electrode spark gapping system, unmatched by any competitor
  • Self-cleaning arc gap
  • Arc gap never carbons across or becomes misaligned because of the Arch and “T” design
  • The ignition head can be raised or lowered in windshield to find maximum ignition point
  • The ignition head is totally retractable to ground level
  • Ignition systems available to suit all stack dimensions
  • Very good fluid overflow resistance
  • Can be installed on any stack dimension and height
  • Easy to repair and maintain
  • Combined with the Tornado™ Technologies wind shroud and gas stripper, this system can’t be beaten by other electronic ignition manufacturers
  • The Tornado™ ignition controls are built for heavy duty service
  • Models available in 12V, 12V solar, 110V A.C. with battery backup. (All A.C. units come with battery backup to assure ignition under power failure conditions.) Other voltage options available upon request.

Options:

  • Tornado™ Technologies standard flare tip shroud with gas stripper
  • Tornado™ Technologies custom design shrouds with gas stripper
  • Remote mounting of control panel
  • Remote manual ignitor
  • Strove light to determine if spark cycle is occurring
  • Retractable or weld-on head available
  • Pull down cable and other options available on request

The Simple-Lite Electronic Ignitors are a dependable source of intermittent sparking type ignition for flare stacks. Tornado™ Technologies has maintained our high standard of dependability but has reduced the amount of components required to supply a 30,000 volt intermittent burst of ignition sparks required to ignite waste gas streams. These systems are user friendly with minimal working parts.

Request more information on an
Electronic Ignitor today!

Oseco | Klinger | Burns Pressure Systems | NUT-SEAL | Rupture Pin Technology | Wellmark/Cemco | Tornado Technologies | Home

Advanced Rupture Disk Technology, Inc.
P.O. Box 670248  Houston, TX  77267-0248
TEL 281.591.6700 - FAX 281.591.6790 -
dave@rupturedisk.com

Site by RMK WebDesign

Site Copyright © 2002 Advanced Rupture Disk Technology, Inc.
Legal Information