Download Product Literature

Features

• ASME Section VIII Div 1 code rated for Air, Liquid and Gas
• Zero Leakage to set point
• Extremely Adjustable
• Superior Spring Design and Material enhance the performance of the product and provide consistent opening and closing pressures.

Benefits

• Our Patented Radius Disc reduces the amount of interference required to seal and assures a reliable reseat even under the most difficult conditions - up to hundreds of “pops”.
• High Endurance Soft Seat supports repeated operation and a bubble-tight shutoff every time
• Radius Disc and Seat Design supports the spring alignment and promotes proper seating
• Low Simmer Rate
• Consistent Blowdown

General Operation

• Taylor’s 8200/8300 Series Safety Relief Valve actuates when the pressure under the valve overcomes the spring force on the disc causing the valve to open, releasing overpressure from the system before re-closing.applications.

Valve Model:  8300 Valve Dimensions:  Connections Available Orifice Sizes:  C, E, G Available End Connections:  Threaded & Flanged Available Connection Sizes:  see 'Connections' Availabe Flanged Connections:  see 'Connections' Orifice Diameter:  Orifice Sizes Orifice Area:  see 'Orifice Sizes' Approximate Weight:  see 'Connections' Available Set Pressure Ranges:  J=15-1000 PSI; K= 15-500 PSI Maximum Temperature:  450degree F Bill of Materials:  Standard Materials Available Body Materials:  Carbon Steel, Stainless Steel Available Seat Materials | Applications:  Viton, HNBR, EPDM, TEFLON Applications/ Usage:  For Gas & Liquid service.

* Commercial Seat Tightness - Taylor Valve Technology’s standard definition and test acceptance criteria for the maximum acceptable leakage though soft seats in its soft seated relief valves is zero SCFH measured at the outlet of the valve with pressure at held at 90 percent of the set pressure immediately after relieving. Measurement will be made using a commercial flow meter capable of detecting a flow of 0.05 SCFH (Dry, clean air at min 62 degrees F).